IR Repeater System – Hidden IR Control System for Home Theater

Posted by admin on Sunday, February 7th 2010   

Digg it

Bookmark it

Stumble it

Email to friend

7
Feb

  • IR Repeater system allows you to Control Home Theater Components Located behind Cabinet Doors
  • Included with the system is – IR Receiver ( 2 inches by 1/2 Inch ) ( 10ft Cable )
  • Hidden IR Repeater Controler ( 3 1/2 Inches by 2 Inches )
  • 2 dual IR emitters (additional dual emitters are available in out store) ( 10ft Cable )
  • Power supply (6ft Cable ) and Instructions

Product DescriptionThis Advanced IR Repeater system is easy to install – 1. Place the receiver in the desired position. You can attach to the position with double sided tape included if you desidera.2. Place the IR emitters on devices that you want to check. (Place on the IR window on the devices) by peeling and attack on dispositivo.3 emitters. Connect the IR receiver in IR receiver jack on the IR repeater controller and plug the dual head IR emitter jack emitter controllore4. Mount the controller hidden in mobile electronics and connect you with plasma and LCD displays fatto.Lavorare Although not designed to reject interference from plasma TVs or LCD, you can get around th. . . More>>

Compare Prices and Check Prices : IR Repeater System – Hidden IR Control System for Home Theater Here!

Bookmark and Share

Subscribe to the post comments feeds or Leave a trackback

Filed under: Electronics & Computers     Tags: , , , , ,
3 Comments   

3 Comments Already

commenter
Bill Said,
February 7th, 2010 @6:26 pm  

Very easy to install and very flexible. Receiver is small and mounts easily on the front of the TV, and repeater 4 individual LED’s are tiny and fit on anything with 2 sides of the tape. Just make sure that the repeaters are facing the “eye” of the DVD or amplifier. System now works better than when I held the door open cabinet with the components in front of me, and I can keep the door closed and have components in any way I want. Now, if I can watch TV, the remote will work. Nice advantage: when the recipient sees the signal, which flashes blue as it were received the message – especially after the good response DVR is so slow. Rating: 5 / 5

commenter
R. Rubino Said,
February 7th, 2010 @7:25 pm  

Not sure what problem the other guy was with this repeater. . . It works great! I initially wanted the hotlink Pro system according to the large number of reviews it has received, but I ended up getting this one as a Christmas present. I tried and it worked really well without lag and good range, so I then proceeded to take the plunge and install it in my home theater. I was very concerned that there could be interference, because I have a 58 “plasma TV on the wall … This was not a factor at all. I could not get this unit to fail entering the IR sensor anywhere around my TV. It worked a little ‘out of sight behind it … That said, the unit is installed just below the TV and center channel speaker. have the system connected to TivoHD, Xbox 360, and my Onkyo amp and not missed a beat. I would highly recommend this to anyone who needs a good IR repeater, and not necessarily concerned with a hook with no line of sight. obstacles small does not affect my signal, but does so to overcome 30ft range If the IR receiver is in sight. I could use my Harmony remote from the outside on the patio with all my devices carefully hidden in my office. All this for half the cost of hotlink Pro – Very happy indeed! Rating: 4 / 5

commenter
Ben Ferguson Said,
February 7th, 2010 @8:09 pm  

Not great. Interference from my TV was so serious as to completely disable the system unless they were standing 1 foot away from the receiver. She must go. Rating: 2 / 5

Related Post

Please Leave Your Comments Below

Please Note: All comments will be moderated

«
»